Powering your electronic device from LumenCache has many benefits. Installed devices and devices that benefit from energy management should use LumenCache power directly with a SIB (Smart Interface Block). Simply attach a SIB in place of the traditional AC/DC power adapters and use convenient DC/DC power.
Otherwise, use the standard USB or USB-PD and the user can power their USB wall plates from LumenCache.
LumenCache LibRE ports support up to 2A @ 12V for device power (RJ45 Pins 4+5, 7+8) and 12Vdc regulated accessory power (pins 1, 2) up to 180mA. The accessory power is always available for standby functions. Device power can be switched and/or regulated at the PDM Port socket device. A Control pin is available (16 channels) to matrix control functions at each port socket.
LibRE RJ45 Port Pinout
|1||Accessory 12V+ (max 180mA)|
|2||Accessory 12V- / GND|
|3||Switch Input / Data A|
|6||Switch Common / Data B|
|7||LED – / GND|
|8||LED – / GND|
OEM SIBs: L-SIB-K
Easy to use SIB-K has a screw terminal for LED+/- and a 10″ wire harness with JST connector for 12V accessory power and Switch/Data pins.
Standard keystone shape allows insertion into common boxes or snap into your own fixture mount.